GM Code Killer Kit For In Dash Modular Lock “Z” Keyway Ignition Removal Tool with Five Retainers
Availability: In stock
|Product Type||Locksmith Tools|
|OE Part #||TL-CK|
|Code Series||Z Keyway in dash|
GM vehicles and those utilizing the B106 key blank or equivalent can be easily removed without having to use an operating key to turn and depress the retainer. When no key is need, no code is needed and you saved money! That’s killer!
- Remove GM "Z" keyway IDML Ignitions without a key
- Eliminate Key Code Broker Service.
- Rapid Removal with NO damage.
- No Dash Or Radio Removal Required.
- Save Money, Save Time.
Step #1 - Remove Trim Ring
Step #2 – Insert tool hook facing down & tip bend towards cylinder until it stops
Step #3 & #4 – Tilt tip up and over retainer spring, lower tool and pull back ¼”, pivot tip downward until it stops. If steel retainer does not fall out apply pressure on face of cylinder.
Step #5 & #6 – Remove cylinder, straighten retainer spring, reinsert steel retainer. Cut key, reinstall & test ignition.
Caution: Do not force tool as tip may break. Use leverage to create bend in retainer spring.